Industrial Handrail Fitting Kits
Slope Angle Options
Are you building your railing on a level surface or a slope?
1. Determine Your Slope
2. Choose Your
Post Type
3. Customise Your
Rails + Tube Size
4. Pair With Base Posts and/or Accessories
Tubeclamp's Customisable Railing Kits
How does it work?
Tubeclamp offers a wide range of convenient and versatile Railing Kits that provide an unmatched solution for constructing strong and scalable hand railings, barriers, or guardrails. These modular kits eliminate the need for specialized tools or complex welding. The fittings easily slide onto the tube and are securely fastened using the provided setscrews, which can be tightened with either an Allen Key or Hexbit Drillbit.
To get started with your railing project, begin by selecting the gradient/slope option that best suits your specific site requirements. Then, personalize your kit by choosing the desired Tube Size, the type of post you need (Intermediate, End, Corner, or T Junction), and the number of rails you'll require. Please note that not all options are available for every combination of types and fittings.
Once you have made these selections, complement your kit by choosing from our range of optional extras. These include Vertical Stanchion Posts with customizable Base Fittings (screws included), Fittings for installing Kickplates, Tubebends like J Bends, and options for horizontal Tube to connect your posts.
All our Fittings and Tubes are crafted from galvanized steel, ensuring exceptional durability and longevity. If desired, we also offer powder coating options upon request.
Please keep in mind that our Railing Kits include steel Tube Fittings and Setscrews only. Tube for stanchions and horizontal posts are sold separately.
Post Types
Intermediate Post
Standard Middle Post
End Post
Terminates The Railing
Corner Post
Connects Two Railings at an angle
T Junction Post
Connects 3 railings together
To Go With Your Handrails
From Fittings to mount Kickplates, to Base Posts, Tube Bends and more.
To find more Tubeclamp handrailing options consider our DDA Disability Handrail Fitting Kits found here.
Frequently Asked Questions
Tubeclamp Structural Fittings have been designed and tested
to comply with the requirements of Australian Standards AS 1657:2018 for handrails. Our products are suitable for use in temporary and/or permanent structures.
For more information please refer to the Tubeclamp product guidelines found here.
However we do offer Base Post Kits to complement your Handrailing Kits which contain your choice of Base as well as Vertical Tube Posts and Masonry Screws for fixing.
Our Handrail Fittings and Tube are made from Hot Dipped Galvanised Steel making them strong and long lasting in most environments. Our products are weather resistant and can be used outdoors for years without issue.
It is important to understand that all steel products will eventually corrode when exposed to outdoor conditions, particularly in regions with high moisture or persistant contact with salt water.
The strength of a handrail typically increases with the number of horizontal rails it has, but the number of rails needed can vary depending on the specific use.
Single-rail handrails are commonly used in residential properties to provide adequate support for walking on ramps and stairs.
In residential, commercial, and industrial settings, two-rail handrails are the most popular choice due to their balance of strength and cost effectiveness. They are also ideal for ensuring accessibility for children and individuals in wheelchairs.
Triple-rail handrails are typically found in pedestrian walkways or roadside barriers in high traffic areas, providing additional protection and safety measures.
The maximum distance between vertical posts for Disability handrailings should be no large than 1.5m.
Single-rail handrails are typically only used within residential properties. They ensure adequate support for walking on ramps and stairs.
Two-rail handrails are the most typical design for residential, commercial and industrial settings. They provide alot of strength and protection for the cost per metre. They are also more suitable for providing accessibility for children and wheelchairs.
Triple-rail handrails are generally used for pedestrian walkways, or roadside barriers, where high vehicle traffic is present.
Disability handrails should be no shorter than 865mm, nor taller than 1000mm.
If mid-rails are installed then the inside distance between the top-rail and mid-rail should be no more than 450mm apart. The distance between the mid-rail and the ground should also be no more than 560mm apart.
Handrails for stairs are the same height as regular handrails relative to the step height rather than to the ground.
Disability handrails are required by Australia standards to contain a smooth top-rail (with no produding elements are holes where little fingers may get caught) with extensions of more than 300mm on both ends. Industrial handrails do not require toe-boards while Disability railings do (when a wall is not present).
Disability handrails must be between 865mm to 1000mm tall.
You can reach out to us using the form below, or you can directly contact our sales team by sending an email to sales@tubeclamp.com.au or by calling us at 02 9157 8777. Please ensure to include all relevant information about your query so that we can provide you with the most effective support.